Information

Potentiostat|Galvanostat

Model : ZIVE PP1e
Company : WonATech
Country : South Korea

ZIVE PP1e, the portable potentiostat/galvanostat/FRA is for electrochemical test such as DC corrosion measurement, EIS test, battery/super capacitor test etc at outdoor.

Introduction

The system is housed in 5 meter water proofed industrial plastic case with 5.4kg weight (including tablet PC) without internal battery pack, 7.7kg with internal battery pack and tablet PC. With external PC, multiple PP1e units can be controlled as multichannel system. Internal potentiostat/galvanostat circuit is floating type to enable pipe corrosion measurement. Optional external battery pack can be used instead of AC/DC adapter. Slim style tablet PC is included as standard but you can use notebook PC.

ZIVE PP1e is equipped with a frequency response analyzer(FRA) for system as standard and it provides high performance impedance measurements over the frequency range 10uHz to 1MHz. ZRA(zero resistance ammeter) function can measure max 1A in galvanic corrosion technique. ZIVE PP1e can be easily upgraded with adding optional application software package without returning the system to the factory for upgrade.

Maintenance

1. The system has its own hardware parameters and calibration data.

2. Water proofed housing

Application

ZIVE PP1e portable electrochemical workstation is ideal for corrosion, sensor, battery, supercapacitor, and solar cell application

Software (SmartManager)
ZIVE PP1e Portable electrochemical workstation use Smart Manager software. You can get more detailed information via above link.

Specification

Main system
PC communication	USB2.0 High Speed
Line voltage	100-240VAC, 50/60Hz, 1Amp
Power adapter	24V @2.5A 60Watt
Size/weight	411X321X165mm(WDH) / 4.4kg
Max output power	15Watt
System
Cell cable	1meter shielded type (Standard)
	Working, reference, counter,
	Working sense,Auxiliary V
Control	DSP with FPGA
Calibration	Automatic
Data acquisition	2x16bit ADCs (500kHz)for voltage, current
ADC	1x 16bit ADCs(250kHz) for auxiliary voltage
DAC	2x16bit DAC(50MHz) for bias & scan
DAC
Filter	4ea (5Hz,1kHz,500kHz, 5MHz)
Scan rate	0 – 200V/sec
Scan rate	0-5000V/sec(fast scan)
Max. channel No.	16 Channels via USB connection
Internal Data Memory	295,000 points
Case	5meter water proof
Power amplifier(CE)
Power	12Watt (12V@1A)
Compliance voltage	±12V
Maximum current	±1A
Control speed selection	4ea
bandwidth	2MHz
Slew rate	10V/usec
(Potentiostat mode(voltage control
- voltage control
Control voltage range	±10V, ±1V, ±100mV
Voltage resolution	16 bit per each range
Voltage accuracy	±1mV±0.05% of setting
Max. scan range	±10V vs. ref. E
- current measurement
Current ranges	120ranges(auto/manual setting)
	1nA ~ 1A
	(1nA & 10nA with gain)
Current resolution	16 bit;
	30uA,3uA,300nA,30nA,3nA,300pA,,
	30pA,3pA, 300fA, 30fA,
Current accuracy	±10pA±0.1% of range(gain x1) >100nA fs.
Galvanostat mode(current control)
- Current control
Control current range	Max. ±1A
Control current range	± full scale depending on selected range
Current resolution	16 bit;
	30uA,3uA,300nA,30nA,3nA,300pA,,
	30pA,3pA, 300fA, 30fA,

Current accuracy	±10pA±0.1% of range(gain x1) >100nA fs.
- Voltage measurement
Voltage ranges	10V,1V,100mV
Voltage resolution	16 bit; 0.3mV,30uV,3uV
Voltage accuracy	±1mV±0.05% of reading
Electrometer
Max input voltage	±10V
Input impedance	2x10¹³ヘ\|\|4.5pF
Bandwidth	>22MHz
CMRR	>114dB

EIS(Internal FRA) for system
Frequency range	10uHz ~ 1MHz
Frequency accuracy	0.01%
Frequency resolution	5000/decade
Amplitude	0.1mV ~ 5V rms (Potentiostatic)
Amplitude	0.1 ~ 70% f.s(Galvanostatic)
Mode	Static EIS:
	Potentiostatic, galvanostatic, pseudo-galvanostatic, OCP
	Dynamic EIS:
	Potentiodynamic, Galvanodynamic
	Fixed frequency Impedance:
	Potentiostatic, Galvanostatic, potentiodynamic, galvanodynamic
	Multisine EIS:
	Potentiostatic, Galvanostatic
	Intermittent PEIS/GEIS
Interfaces for system
Auxiliary port
Auxiliary voltage inputs	1 analog Input: ±10V
	For measurement of WE vs. CE
Zero Resistance Ammeter	100nA ~ 1A ranges
Software
Max steps per experiment	1000
Shutdown safety limits	Voltage, current,AuxVetc
Max. sampling rate	20kHz(50usec)-burst mode/500jHz(2usec) in fast sweep mode
Max. sampling time	unlimited
Sampling condition	Time, dv/dt, dI/dt etc.
PC requirement
Operating system	WindowsXP SP3/7/8/10
PC specification(minimum)	Pentium4, RAM 1GB
Display	1600x900 high color
USB	High speed 2.0
General
Dummy cell	One external dummy cell included

Potentiostat| Galvanostat ZIVE PP1e

Information